Vortex® VMX-3T Magnifier

A magnifying device that goes in front of the red dot and adds to its function an even triple magnification. It was this magnification that proved to be the best, and you won't find a bigger one for the better-quality manufacturers, of which Vortex is indisputably one. Mount the magnifier in front of the red dot with the orbit and release button towards the shooter. The device also comes with an insert plate designed for mounting in a higher position and changing the position of the collimator's intentional dot. The change in mounting height is suitable for use with higher collimators. The device works with all red dot collimators. Not recommended for use with prismatic systems.

Resilient body

The body of the magnifier is made of high-quality aluminium, which is anodized in black for greater resistance as well as a more attractive look Also because of this, the device is not a source of undesirable reflections that tell the shooter to his enemies or the hunter to his game. Hard anodizing also increases the resistance of the surface and the entire device to damage.

Resilient optics

Adjusted lenses with full multi-coat provide excellent image quality due to extremely high light transmission. Provide thus optimal observational results. This state-of-the-art technology guarantees a perfectly clear image with high contrast, sharp contours and natural color resolution. Antireflective treatment is applied to external lenses that come into contact with air.

Control is a key

Controlling the device is really simple. By rotating the ring on the orbit, we regulate focus, that is, focus exactly for your eye. The magnifier adjusts using screws. With the right screw we adjust the side correction (windage) and with the upper screw we control the elevation correction (elevation). Using these screws, we align the collimator's intentional dot to the so-called zero. The device is equipped with a tilt mounting, so if you don't want to use the magnification, simply press the release button and flip the magnifier to the left.

For harsh weather

It's waterproof, plus filled with nitrogen and sealed with "o" rings, so it won't leak or fog in. Special sealing technology protects high-end optics from outside influences. No dust, no dirt and no moisture can penetrate the magnifier and cause damage and/or defects in the supplied image.

Eye relief

Eye relief, the maximum eye distance from the exit lens, in which the shooter can still see the entire field of view of the rifle range, is sufficient to eliminate possible injuries from the recoil of the shot.

Important: For the magnifier to work properly, proper assembly is essential. Follow instructions in the manual.

Benefits you need to know about:

• magnifying device designed to be placed in front of a collimator
• suitable for tactical use as well as for hunters
• compact dimensions - tube diameter about 3 cm
• low weight
• aluminium body
• black anodizing does not produce reflections and its hardness is protected by a magnifier
• modern technologies
• waterproof – sealed with "o" rings
• treated against internal fogging - filled with nitrogen
• lenses with anti-reflective modification of FMC
• very clear high contrast image, with sharp contours and with natural colour resolution
• sealing technology protects high-end optics from external influences
• sufficient eye relief to eliminate injuries from recoil
• easy to control
  • windage adjusts with screw on right side
  • elevation is set with the screw on top
  • sharpening with a wheel at the back of the eye