Let's enjoy a crystal clear water anywhere in the world with the Sawyer Select filters. The filtration systems marked S1, S2 or S3 remove practically all contaminants found in fresh water and improve the water smell and flavour. These three models combine the patented foam membrane and a sturdy silicon bottle with the Sawyer hollow fibre (0.1 micron) filter. These filters allow access to pure water while you are travelling anywhere in the world, at home, in the office or in emergency situations.
The used absorption foam technology was developed in collaboration with Foamulations LLC in order to be able to eliminate undesirable contamination and to improve the water's taste and smell. The absorption filtration is a process where molecules stick to the foam membrane surface. This highly advanced process in combination with the absolute filter with 0.1 micron pores ensure that all particles bigger than 0.1 micron are filtered out to include bacteria, protozoa and other impurities and sediments.
All three Sawyer foam filters (S1, S2, S3) reduce the amount of chemicals to 0.5 unit per billion (which means a 40 times lower value than the EPA maximum recommended level) and the content of pesticides to 0.01 unit per billion (which means a 400 times lower value than the EPA maximum recommended level). As a bonus, we get a significant improvement in the taste and smell of the water. For example, if we travel on trails near pastures and fields worrying about pesticides contained in the underground water (due to fertilization), then Sawyer S1 will definitely be the right choice for you.
Unscrew filter, fill bottle to the max mark and screw the filter back on. Squeeze and release the bottle for about 10 seconds. Then you can drink straight from the filter or pour/filter the water into another container, for example a mug or your field mess kit.
Need a replacement bottle for this filtration system? Buy it here.
Height | 11 cm |
Width / diameter | 3,5 cm |
Weight | 283 g |