Peli™ Storm Case® iM2750 Heavy-duty waterproof case (with foam)

€ 559,7

Product code: IM2750-00001

Warranty length: 2 years

Storm Case is a product line of high-quality and durable, almost indestructible cases from Peli Products, S.L.U. In particular, the iM2750 case can boast of a light and strong construction, made of special HPX resin.

Buckle closure

The Peli Storm Case iM2750 is closed with a total of 4 buckles, all of which can be closed with one hand, which further simplifies the handling of the case. The case is lockable and has two loops for a padlock. And its portability is facilitated by 3 comfortable double-layer handles with a rubber grip on the bottom, a telescopic handle or 2 wheels for easy transport.

Durable design

Overall, this case is very sturdy – it is equipped with highly durable hinges and is also waterproof, dustproof and shockproof. The seal is realized using an O ring. The luggage meets (not just military) standards MIL-STD-810F, FED-STD-101C and ATA 300. It can withstand extreme temperatures in the range of -29 °C to +60 °C. And we must mention the Vortex pressure equalization valve. In this variant, the case is delivered with an inner foam (padding).

Benefits you need to know about:

a case ideal for transporting weapons
light but strong construction
made of special HPX resin
4 large lockable buckles with a safety device, operable with one hand
waterproof, dustproof and shockproof
durable hinges
3 comfortable double-layer handles with rubber grip and soft grip
1 telescopic handle
2 wheels for easier transport
lockable, 2 padlock loops
Vortex automatic pressure equalization valve
firm and tear-resistant foam padding
certified / meets MIL-STD-810F, FED-STD-101C and ATA 300 standards

Optional accessories (not included in delivery):

replacement foam padding
file cabinet with adjustable dividers
basic equipment for attaching the mounting frame to the case
open lid holder
manual balancing valve
file cabinet for the case lid

Do you like the product?

Buy Peli™ Storm Case® iM2750 Heavy-duty waterproof case (with foam) at a special price € 559,7

Important parameters

Height / length	62,5 cm
Width	50 cm
Depth	36,6 cm
Volume	77,9 l
Material in detail	Case body: injection-molded HPX® resin O-rings: synthetic elastomer EPDM (Ethylene Propylene Diene Monomer) Foam: polyester Valve: Gore-Tex® membrane
Dimensions in detail	Internal dimensions: 55.9cm × 43.2cm × 32.3cm Internal depth of the case without the lid: 27.2cm Internal lid depth: 5.1cm Overall internal depth of the case: 32.3cm Padlok hole diameter: 0.8cm
Weight in detail	Empty case: 8.4kg Case with foam: 10.6kg
Fixing / transport	1 comfortable double-layer handle on the long side with a soft rubber grip 2 comfortable double-layer handles with soft rubber grip (1 on each short side - for two-handed carrying) Telescopic handle on the short side and 2 wheels on the opposite side
Other specifications	Very durable Sturdy hinges Waterproof Dustproof Shockproof Closure: 4 large buckles / latches - 2 on the long side and 1 on each short side - operable with one hand Lockable: 2 openings / hasps for a padlock on the long side (at the edges next to the buckles) --- Vortex™ automatic pressure valve Operating temperature: -29°C to +60°C Buoyancy (ability to stay afloat on water surface): max 78.7kg Protection: IP67 - tested content protection against dust and water ingress according to EN 60529 standard (dustproof + withstands immersion to a depth of 1m for 30 minutes) Made in USA
Parts of delivery	Case Protective foam - 8 layers: 1) corrugated foam with a thickness of 5.1cm for the lid 2) pick & pluck foam with a thickness of 4.3cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 3) pick & pluck foam with a thickness of 4.3cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 4) pick & pluck foam with a thickness of 4.3cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 5) pick & pluck foam with a thickness of 4.3cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 6) pick & pluck foam with a thickness of 4.3cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 7) pick & pluck foam with a thickness of 4.3cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 8) full foam with a thickness of 1.6cm for the bottom of the case

Tutorials and files to download Certificate Product list

Product inquiry

Enter your name *

Enter your e-mail address *

I agree with terms and conditions

Do you like the product?

Buy Peli™ Storm Case® iM2750 Heavy-duty waterproof case (with foam) at a special price € 559,7

Product category

Variants

Doručení do České republiky? Přejděte na Odolný vodotěsný kufr Peli™ Storm Case® iM2750 s pěnou

Doručenie na Slovensko? Prejdite na Odolný vodotesný kufor Peli™ Storm Case® iM2750 s penou

97% of goods in stock

Money back guarantee

Brick-and-mortar stores

Our customers have a brick-and-mortar store in Semily, about 40 km from Liberec, and in Olomouc. We also deliver goods to Slovakia on Rigad.sk and also to the whole of Europe and practically the whole world on Rigad.com.

Purchase information

About the company

Shop

Thanks to the satisfaction of verified customers, the Rigad.cz shop has received the prestigious Gold Verified by Customers certificate.

NCAGE 828DG

Peli™ Storm Case® iM2750 Heavy-duty waterproof case (with foam)

Buckle closure

Durable design

Benefits you need to know about:

Optional accessories (not included in delivery):

Product inquiry

Product category

Variants

Peli™ Storm Case® iM2750 Heavy-duty waterproof case (with foam) - Olive Green

Peli™ Storm Case® iM2750 Heavy-duty waterproof case (with foam) - Black

Peli™ Storm Case® iM2750 Heavy-duty waterproof case (with foam) - Yellow