Storm Case is a product line of high-quality and durable, almost indestructible cases from Peli Products, S.L.U. In particular, the iM2700 case can boast of a light and strong construction, made of special HPX resin.
The Peli Storm Case iM2700 has a total of 4 buckle closures, all of which can be closed with one hand, which further simplifies the handling of the case. The suitcase is lockable and has two loops for a padlock. And its carrying is facilitated by a comfortable two-layer handle with a rubber grip on the underside.
Overall, this suitcase is very sturdy – it is equipped with highly durable hinges and is also waterproof, dustproof and shockproof. The seal is realized using an O ring. The luggage meets (not just military) standards MIL-STD-810F, FED-STD-101C and ATA 300. It can withstand extreme temperatures in the range of -29 °C to +60 °C. And we must mention the Vortex pressure equalization valve. In this variant, the suitcase is delivered with an inner foam (padding).
Height / length | 62,5 cm |
Width | 50 cm |
Depth | 21,8 cm |
Volume | 49 l |
Material in detail | Case body: injection-molded HPX® resin O-rings: synthetic elastomer EPDM (Ethylene Propylene Diene Monomer) Foam: polyester Valve: Gore-Tex® membrane |
Dimensions in detail | Internal dimensions: 55.9cm × 43.2cm × 20.3cm Internal depth of the case without lid: 15.2cm Internal lid depth: 5.1cm Overall internal depth of the case: 20.3cm Padlock hole diameter: 0.8cm |
Weight in detail | Empty case: 5kg Case with foam: 6.5kg |
Fixing / transport | 1 comfortable double-layer handle on the long side with a soft rubber grip |
Other specifications | Very durable Sturdy hinges Waterproof Dustproof Shockproof Closure: 4 large buckles / latches - 2 on the long side and 1 on each short side - operable with one hand Lockable: 2 openings / hasps for a padlock on the long side (at the edges next to the buckles) --- Vortex™ automatic pressure valve Operating temperature: -29°C to +60°C Buoyancy (ability to stay afloat on water surface): max 51.1kg Protection: IP67 - tested content protection against dust and water ingress according to EN 60529 standard (dustproof + withstands immersion in 1m depth for 30 minutes) Made in USA |
Parts of delivery | Case Protective foam - 5 layers: 1) corrugated foam with a thickness of 5.1cm for the lid 2) pick & pluck foam with a thickness of 4.6cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 3) pick & pluck foam with a thickness of 4.6cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 4) pick & pluck foam with a thickness of 4.6cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 5) full foam with a thickness of 1.6cm for the bottom of the case |