Peli™ Storm Case® iM2975 durable waterproof case with foam

€ 633,3

Product code: IM2975-00001

Warranty length: 2 years

Storm Case is a product line of very high-quality and durable, almost indestructible cases from Peli Products, S.L.U. Specifically, the iM2975 case boasts a lightweight and strong construction made from special HPX resin.

Latch closure

The Peli Storm Case iM2975 has a total of 5 latches, all of which can be closed with one hand, further simplifying handling of the case. The case is lockable and has two hasps for padlocks. Its transport is made easier by three comfortable double-layer handles with a rubber grip on the underside. Additionally, it can be easily transported on the ground thanks to two wheels and a telescopic handle.

Sturdy design

Overall, this case is very sturdy—equipped with highly durable hinges and additionally waterproof, dustproof and shockproof. The sealing is implemented with an O-ring. The luggage meets (not only) military standards MIL-STD-810F, FED-STD-101C and ATA 300. It withstands extreme temperatures ranging from -29°C to +60°C. And we must mention the Vortex pressure equalization valve. This variant of the case comes with internal foam (padding).

Benefits you need to know about:

ideal case for transporting weapons
lightweight but strong construction
made from special HPX resin
5 large lockable latches with safety, operable with one hand
waterproof, dustproof and shockproof
sturdy hinges
3 comfortable double-layer handles with rubber grip and soft grasp
lockable, 2 hasps for padlocks
2 wheels for easy transport
telescopic handle for wheel transport
automatic Vortex pressure equalization valve
certified / meets standards MIL-STD-810F, FED-STD-101C and ATA 300

Optional case accessories (not included):

spare foam insert
organizer with adjustable dividers
basic kit for attaching mounting frame to the case
open lid holder
manual pressure equalization valve
organizer for the case lid

Do you like the product?

Buy Peli™ Storm Case® iM2975 durable waterproof case with foam at a special price € 633,3

Important parameters

Height / length	79,5 cm
Width	51,8 cm
Depth	39,4 cm
Volume	118,1 l
Material in detail	Case body: HPX® injection-molded resin "O" rings: synthetic elastomer EPDM (Ethylene Propylene Diene Monomer) Foam: polyester Valve: Gore-Tex® membrane
Dimensions in detail	Internal dimensions: 73.7cm × 45.7cm × 35.1cm Internal depth of the case without lid: 30cm Internal depth of the lid: 5.1cm Overall internal depth of the case: 35.1cm Padlock hole diameter: 0.7cm
Weight in detail	Empty case: 10.3kg Case with foam: 13.4kg
Fixing / transport	1 comfortable double-layer handle on the long side with a soft rubber grip 2 comfortable double-layer handles with a soft rubber grip (1 on each short side - for two-handed carrying) Telescopic handle on the short side and 2 wheels on the opposite side
Other specifications	Very durable Sturdy hinges Waterproof Dustproof Shockproof Closure: 5 large buckles / latches - 3 on the long side and 1 on each short side - operable with one hand Lockable: 2 holes / latches for padlock on the long side (at the edges next to the outermost 2 buckles) --- Vortex™ automatic pressure valve Operating temperature: -29°C to +60°C Buoyancy (ability to stay afloat on water surface): max 113.4kg Protection: IP67 - tested for protection against dust and water ingress according to the EN 60529 standard (dustproof + withstands immersion up to 1 meter depth for 30 minutes) Made in USA
Parts of delivery	Case Protective foam - 8 layers: 1 wavy foam with a thickness of 5.1cm for the lid 2 pick & pluck foam with a thickness of 4.8cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 3 pick & pluck foam with a thickness of 4.8cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 4 pick & pluck foam with a thickness of 4.8cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 5 pick & pluck foam with a thickness of 4.8cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 6 pick & pluck foam with a thickness of 4.8cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 7 pick & pluck foam with a thickness of 4.8cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 8 full foam with a thickness of 1.6cm on the bottom of the case

Tutorials and files to download Certificate Product list

Product inquiry

Enter your name *

Enter your e-mail address *

I agree with terms and conditions

Do you like the product?

Buy Peli™ Storm Case® iM2975 durable waterproof case with foam at a special price € 633,3

Product category

Variants

Doručení do České republiky? Přejděte na Peli™ Storm Case® iM2975 odolný vodotěsný kufr s pěnou

Doručenie na Slovensko? Prejdite na Peli™ Storm Case® iM2975 odolný vodotesný kufor s penou

97% of goods in stock

Money back guarantee

Brick-and-mortar stores

Our customers have a brick-and-mortar store in Semily, about 40 km from Liberec, and in Olomouc. We also deliver goods to Slovakia on Rigad.sk and also to the whole of Europe and practically the whole world on Rigad.com.

Purchase information

About the company

Shop

Thanks to the satisfaction of verified customers, the Rigad.cz shop has received the prestigious Gold Verified by Customers certificate.

NCAGE 828DG